Panels Plus Tilt Table

This machine is designed to tilt the wall panel from lying flat to 75 degrees to allow the operator to work on the bottom side of the wall. The wall panel is rolled into the table and clamped to ensure the wall panel cannot come out when in the tilted position.

General Specifications:

The following dimensions are approximate and are provided only to give the foot print of the machine. Additional space is required for material storage and handling.

Machine Length 18’-2”
Machine Width 12’-6”
Machine Height 8’-4”
Table Height 33”
Wall Length up to 16’-0
Wall Height 6’-8” – 12’-4”
Electrical 120Vac/60Hz/15amp
Air 15CFM @ 90-120 psig

Call us for custom-sized builds